This package is a brushless system and lighting control system designed for the FCX24 K5 vehicle. The lighting control system is recommended to be used in conjunction with a MG44 V6 Transmitter. When paired with the V6 transmitter, all lighting wires will work. However, when paired with the V5 transmitter, the headlights and spotlights will lose their lighting effects, while signal lights and rear lights (if present) will still function normally.

Package Includes:
Combo A (w/o MG44 V6 Transmitter)
1×BATRAZZI 3200KV Outrunner Motor, Receiver and FOC ESC
1×FCX24 K5 Plastic Receiver Mount
1×FCX24 K5 Light Control System Set
1×Transmission Middle Cover
2×JST-Dupont Converter Cables

Combo B (w/ MG44 V6 Transmitter)
1×BATRAZZI 3200KV Outrunner Motor, Receiver and FOC ESC
1×FCX24 K5 Plastic Receiver Mount
1×FCX24 K5 Light Control System Set
1×Transmission Middle Cover
2×JST-Dupont Converter Cables
1×BATRAZZI MG44 V6 Transmitter

Light System Installation:

- Connect the head light wires to the light control system as illustrated in the provided diagram.
- Ensure one side of the Dupont-to-Dupont Connection Cable to the receiver’s CH4 port, and the other side connects to the light control system.
- Double-check to match the correct polarity (positive and negative) during setup.

2.Operation:
- Transmitter CH4 Button Controls:
①Press once: Turn on the head lights.
②Press three times: Turn off the head lights.

Note: For the installation of the light control system on the FCX24 K5, you can choose the installation location yourself. The above illustration is for reference only.

Specifically Built for the FMS FCX24 K5.
This light set is custom-assembled for the FCX24 Chevrolet K5n, and it’s may not perform as intended when used with other RC vehicles.