Product Overview
The SKE-Series Voice Evacuation System provides maximum flexibility to accommodate your voice evacuation requirements

The SKE-Series Voice Evacuation system provides 50 watts of output power. The SKE-Series system consists of several different models, the SKE-450, SKE-450-ZN4 or SKE-450-ZN6. Each model has a built in Digital Message Repeater, power supply and a supervised microphone. All models have two alarm inputs, one triggered by reverse polarity and one by supervised dry contact trigger. The system supports 25 or 70.7 VRMS operation to accommodate most installations. The audio messages are field programmable via the built in microphone, through the line level input, or by downloading via the internet. The models SKE-450-ZN4 (w/4-zone splitter) and SKE-450-ZN6 (w/6- zone splitter) also contain a zone splitter capable of dividing the speaker output into 4 or 6 separate outputs.

SKE-Series Voice Evac. System

The SKE-450 and SKE-450-ZN4/ZN6 voice evacuation are activated when one of the two alarm inputs are tripped. When this occurs the control will output a pre-recorded audio message corresponding to the alarm input that was tripped. The repetition of the digital audio message and the selected notification output are completely programmable.

The SKE-450-ZN4/ZN6 comes equipped with a 4 or 6 zone splitter respectively, capable of dividing the speaker output from the amplifier into four or six Class B or Class A outputs. The zone splitter also has an All Call feature that will activate all speaker zones regardless of the individual toggle switch settings.

Both models provide seven visual indicators for, Speaker Trouble, Alarm, Microphone Trouble, Command 2 Trouble, Earth Ground Fault, Low Battery, and Power.

Features
50 watts of output power on a 25 or 70.7 VRMS speaker circuit. The speaker circuit can be Class A or B. Provides maximum flexibility for new or retrofit jobs.
Downloadable Voice Messages via direct connect. If you need a different message download it from the SK website free of charge!
Digital Message Repeater -Built in to the SKE motherboard. No additional wiring to install makes setup fast and easy. Capable of storing three messages, messages one and two are built in messages of up to 30 seconds. Message three is field programmable and can be up to 45 seconds long.
Digital Signal Processor -Processes digital quality audio, generates tones and provides control functions.
Supervised Microphone -The built in supervised microphone provides system paging function and field message programming capability.
Dead Front Cabinet - Provides protection for users, prevents tampering with system electronics.

Main Features
50 watts of output power on a 25 or 70.7 VRMS speaker circuit. The speaker circuit can be Class A or B.
Downloadable Voice Messages via direct connect.
Digital Message Repeater - Built in to the SKE motherboard
Digital Signal Processor - Processes digital quality audio, generates tones and provides control functions.
Dead Front Cabinet - Provides protection for users, prevents tampering with system electronics.
Dedicated relays-Built in form "C" relays for alarm and trouble increase flexibility and keeps installation cost down.
Built in system power is capable of operating the system and charging system backup batteries.
The SKE-ZN4 zone splitter provides four Class B or Class A output circuits (each loop can draw 50 watts, with maximum of 50 watts total for whole system).
UL Listed, MEA approval 429-92-E Vol. XI, CSFM Listed

General Information
Name: Silent Knight SKE-450ZN4 Voice Evacuation with 4-Zone Splitter, 50W
Category: Silent Knight by Honeywell, Fire, Voice Evacuation Systems
UPC Code: 783196010779
Country of Origin: United States. Country of origin is subject to change.