Liquid Metal bundle Kit

Not sure what colour metal you want to use on you surface design ? Than why not get this bundle kit

The kit includes:

1kg of Bi Plasma 3D metal Base,

50g Bi plasma 3D part B, 

We have 4 colours included: Bronze, Gold Brass, Zinc and Copper which you will receive 187g of each colour making upto 748g

Yield for full kit is 3 to 3.5m2-  (Based on a smooth tight finish)

Liquid Metal is an innovative decorative Venetian plaster finish made by mixing fine metal powders with a specialized base. In this case, it is combined with Bi Plasma 3D Metal Base (Part A) and a hardening agent (Part B) to create a durable and striking metal surface design.

This advanced formulation results in a unique finish that mimics real metal finish, offering a smooth or textured appearance with a natural metal sheen. The addition of Part B enhances the hardness of the surface, making it exceptionally durable and suitable for both residential and commercial applications.

Where can it be applied?

Liquid Metal kit is a type of Venetian plaster, and creates bespoke metal projects, it can be applied to walls, ceilings, furniture, or statement features, this finish delivers a sophisticated, high-end aesthetic with a contemporary edge. Available in a variety of stunning shades, including brass gold, silver, zinc, bronze, and copper, allowing for endless creative possibilities. 

Surface Preparation

Before applying the Liquid Metal, ensure the surface is properly primed with two coats of Intermedial Primer. This step helps create a stable base and enhances adhesion. Allow the primer to dry fully before proceeding.

Applying the Metal Coating

The Liquid Metal is applied using a trowel and can be built up in 1 to 3 coats, depending on the desired finish and the type of metal being used. For additional creative effects, you can:

• Blend the Liquid Metal with coloured Bi Plasma for a custom metallic tone.
• Layer it over a coarse or medium marmorino finishes like Volare or Infinito to create texture and depth.

Two-Coat System Application

1. First Coat – Apply the first coat evenly and allow it to dry for 1-2 hours. If you have mixed the product, store it in an airtight container to prevent drying out.
2. Second Coat – Once the first coat is dry, apply the second coat and leave it to cure overnight (approximately 24 hours, depending on temperature and humidity).

Sanding & Polishing

Once fully cured, the surface must be sanded to achieve the desired metallic sheen. Follow this sanding sequence for a polished effect:

• Use sanding pads in this order: 400, 800, 1000, 2000 grit (ensure you use paper pads with a backing pad attached).
• For a mirror-like finish, remove the backing pad and continue sanding with 3000 & 6000 Trizact discs.

Sealing & Protection

• If applying a wax sealer, you can proceed after the final sanding step.
• If using Microvetro BI as a protective sealer, stop sanding at 1000 grit to ensure proper adhesion.