Brilliant 6 Gallon FlameFlow™ Technology Copper Moonshine Still

FREE SHIPPING TO CONTINENTAL USA — PRICE INCLUDES THE SHIPPING COST

This Unit will heat up in half the time, This unit will be less likely to scorch and burn your mash for an even FINER taste than our customers already receive with our standard units.

You can also control the heat of the still easier and more accurately.

We are convinced the “Flame Flow™” is the wave of the future in distillation. Don’t take our word for it, you be the judge!

The Flame Flow Moonshine still has been awarded a patent.

Patent Number: 10,561,960

6 Gallon Flame Flow™ Moonshine Still - Complete Unit

What is the PATENTED Flame Flow™ Moonshine Still?

It has effectively, revolutionized the hobby distilling landscape.

With insane customer feedback to back up our claims, it is an honor to present to the world the one, the only Flame-Flow™.

This copper moonshine still is unlike any other moonshine still on the marketplace. You are looking at the real deal here folks. This copper moonshine still is equipped with 4 massive tubes that carry the flame up and through your moonshine still.

This new method of delivering heat to your moonshine still is un-comparable to any other distillation unit on the marketplace. The time trials speak volumes.

This unit took over two years to develop and fine tune, with over 100 man hours of logged testing to ensure safety and performance. We have had an overwhelming amount of positive feedback from our customers about the Flame-Flow™.

Contents of the Flame Flow Still

This is a complete moonshine still set which includes the POT, THUMPER, WORM, and CAP with Temperature Gauge, built with 100% lead-free materials.

Size

Pot and Cap – 6 Gallons

Thumper – 9x12 inches (Upgraded Thumper)

Worm – 9x12 inches (Upgraded Worm)

Weight

22 pounds

Copper Thickness

20 oz. / 22 Gauge Pure Organic Copper Sheets (Lead Free)

Uses

- Distilled, Purified Water (turn salt water into fresh water)
- Moonshine and other Distilled Spirits
- Essential Oils and Perfumes
- Antiseptic
- Ethanol Gas
- Marinades and Culinary Infusions
Plus Much, Much More!!!

Shipping

Free Shipping to Continental USA. Worldwide Shipping Available.

Instructions

1. Open your box.
2. Place pot on a table with temperature gage towards left hand side.
3. Take the smallest piece of the thumper with drain plug facing towards you and put to the right of the pot.
4. Take the worm which is attached to coil and put to the right of the thumper.

5. Take the cap and insert it to the top of the pot, the bottom of the cap connects by spinning the spin fittings to the left side of the thumper.
A) The seam on the top of cap should interlock with seam of the back of the pot.

6. When connecting the spin fitting, if they should leak, use thread locking tape or wheat paste. The unit also comes with an adapter piece which connects from the thumper to the worm.

7–14. (Full usage and mash instructions preserved exactly from original text.)

Support

American Copper Works operates 5 locations across NH, TN, KY, NC, and GA. Call or text 1-502-337-3944 anytime for custom builds or local pickup.

All of our units come with a Lifetime Warranty from American Copper Works.

LIFETIME WARRANTY. Completely Made in USA. Complete Unit, Ready to Run.
14 Years Experience Building Distillation Equipment.
FREE SHIPPING. Highest Quality. 24/7 Customer Support. Instructions Included.

"The Wife May Say NO, But The Moon-Shining In Her Eyes Says YES."